Notice to all visitors and members of the Train-Sim.Com message forums: If you plan on using a signature banner in your posts, we would like to remind you that there is a maximum size for banners. That maximum is 450 pixels wide by 120 pixels high, and not to exceed 25k. Your compliance is appreciated. FORUM RULES Problems? There are two common reasons for problems with logging in and posting messages. The first is that you are running a firewall that prevents your messages from being sent to the server. The other is that you have cookies disabled; the DCForum software requires cookies to work properly.
I have probelm with the long haul part activity for Cascade Crossing route. I'm on the main at Judkins with a frieght wait to come off the wye and a freight coming from Springfield. The freight arrives from springfield and just sits beyond the points for the crossing loop.Is there anyway to make the freight from Springfield move into the croosing loop?William
Been a while since I ran this activity, IIRC I had to back up my train just slightly and the train immediately in front of you will take the turnout and you should then get a green.Ken
Hello William,I found that by stopping at the point where the distance to the red signal went from 0.1 to 0.0 that the train approaching on my track did not stop. Then after it passed I had to nudge my train forward to get the green for my direction.I experimented a little and found that if I was too close to the signal that the approaching train would stop and nothing that I tried would get him rolling again.EL_AL
