Hi all,Please feel free to add or modify any parts of the translation. ???? means I am really lost = a guess.Goodluck, the translation of the table is poor at best so I have omitted it.Panel2.cfg
About the layer1 - 15 allowable settings.
1 is the bottom, 15 is the top most.
Panel.bmp picture is 0 (bottom most of all). About the angle of the needle
Direction of 12 o'clock starting point (more likely 12 o'clock = 360, so 9 o'clock = -90 and 3 o'clock = 90, etc) .
Clockwise rotation is normal.
The needle which 1 lap or more it turns setting the value of LastAngle to the value of InitialAngle + 360. < This>
Panel objectResolution = value
X resolution at time of zoom x1 (ie value of 480 if it a 480 x 400 .bmp)Left = value
Co-ordinates of the limit which can be displayed to the Left (used when looking about the cab)Top = value
Co-ordinates of the limit which can be displayed to the Top (used when looking about the cab)Right = value
Co-ordinates of the limit which can be displayed to the Right (used when looking about the cab)Bottom = value
Co-ordinates of the limit which can be displayed to the Bottom (used when looking about the cab)DaytimeImage = path
Bitmap (.bmp) image of the Daytime panelNighttimeImage = path
Bitmap (.bmp) image of the Nighttime panelTransparentColor = #color
Transparance color using the HEX values (ie #00000 for Black, #0000FF for our current Blue)Center = x, y
The coordinate which is center of the picture in default point of view (ie when you have finished looking about the cab)Origin = x, y
Coordinate of disappearance point ???? How far you can look away from the Center ????< Timetable>
Time table object (Bitmap (.bmp) image of the Timetable)Location = x, y
Co-ordinate with respect to the time table left in the panel pictureWidth = value
Width in the time table in the panel pictureHeight = value
Height in the time table in the panel pictureTransparentColor = #color
Transparance color using the HEX values (ie #00000 for Black, #0000FF for our current Blue)Layer = value
Layer value (ie 1 bottom most next to panel.bmp through to 15 top most)< PilotLamp>
Indicating lamp objectSubject = key
The property which it indicates (and key that operates it)Location = x, y
Coordinate with respect to the indicating lamp left in the panel pictureDaytimeImage = path
Bitmap (.bmp) image of the Daytime indication lampNighttimeImage = path
Bitmap (.bmp) image of the Nighttime indication lampTransparentColor = #color
Transparance color using the HEX values (ie #00000 for Black, #0000FF for our current Blue)Layer = value
Layer value (ie 1 bottom most next to panel.bmp through to 15 top most)< Needle>
Guide object (ie create your own styled and coloured needle)Subject = key
The property which it indicates (ie brake cylinder pressure or speed)Location = x, y
The rotary center in the panel picture (centre point for the ????)DaytimeImage = path
Bitmap (.bmp) image of the Daytime needleNighttimeImage = path
Bitmap (.bmp) image of the Nighttime needleColor = #color
Color of surface ???? Possibly use a one created by BVE, like in v2.6 ????
T
ransparentColor = #color
Transparance color using the HEX values (ie #00000 for Black, #0000FF for our current Blue)Origin = x, y
The rotary center in the picture of the needle (centre point about which it will be rotated)Layer = value
Layer value (ie 1 bottom most next to panel.bmp through to 15 top most)Radius = value
Radius of needle (like currently required eg 39 pixels)InitialAngle = value
Angle of the needle which points to minimum (normally 0, 12 o'clock = 360, so 9 o'clock = -90 and 3 o'clock = 90, etc) .LastAngle = value
Angle of the needle which points to maximum (typically 120mph or 1050 kpa, 12 o'clock = 360, so 9 o'clock = -90 and 3 o'clock = 90, etc) .Minimum = value
Minimum (typically 0)Maximum = value
Maximum (depends on top indicatable speed or pressure)NaturalFreq = value
Specific angular frequency of needle ????DampingRatio = value
Damping ratio of needle (speed with which the needle can respond to a change in value)< DigitalGauge>
Circular digital gauge objectSubject = key
The property which it indicates (ie brake cylinder pressure or speed)Location = x, y
The rotary center in the panel picture (centre point for the ????)DaytimeImage = path
Bitmap (.bmp) image of the Daytime needleNighttimeImage = path
Bitmap (.bmp) image of the Nighttime needleColor = #color
Color of LED going out using the HEX values (ie #00000 for Black, #FF0000 for Red, #00FF00 for Green)Layer = value
Layer value (ie 1 bottom most next to panel.bmp through to 15 top most)Radius = value
Radius of gauge (like currently required eg 39 pixels)InitialAngle = value
The smallest angle ???? probably very similar values to analogue gauges ????LastAngle = value
Largest angle ???? probably very similar values to analogue gauges ????Minimum = value
Minimum (typically 0)Maximum = value
Maximum (depends on top indicatable speed or pressure)Step = value
Resolution (divisions)< DigitalNumber>
Digital numeric object (Bitmap (.bmp) image of the numerals)Subject = key
The property which it indicates (ie brake cylinder pressure or speed)Location = x, y
Coordinate with respect to the numeric left in the panel picture (top left corner of numeral)DaytimeImage = path
Bitmap (.bmp) image of the Daytime numeralsNighttimeImage = path
Bitmap (.bmp) image of the Nighttime numeralsTransparentColor = #color
Transparance color using the HEX values (ie #00000 for Black, #0000FF for our current Blue)Layer = value
Layer value (ie 1 bottom most next to panel.bmp through to 15 top most)Interval = value
Height of 1 numeral (possible its width as well?)PS you will need to make the panel.bmp wider if you wish to look around it.Bye for now,Stephen.
[ Home | MSTS Forum | MSTS FAQ | How To... | File Library ] Copyright © 2004 by Nels Anderson. All Rights Reserved.