Train-Sim.Com
MSTS Sound Design

As I suspected… the coupler sound triggers

Notice to all visitors and members of the Train-Sim.Com message forums:
If you plan on using a signature banner in your posts, we would like to remind you that there is a maximum size for banners. That maximum is 450 pixels wide by 120 pixels high, and not to exceed 25k. Your compliance is appreciated. FORUM RULES Problems? There are two common reasons for problems with logging in and posting messages. The first is that you are running a firewall that prevents your messages from being sent to the server. The other is that you have cookies disabled; the DCForum software requires cookies to work properly.

Previous Topic | Next Topic

Printer-friendly copy Email this topic to a friend

Reading Topic #366

Member since Sep-12-02 · 241 posts

RE: As I suspected .... the coupler sound triggers ....

About 20 lines into an .eng or .wag file you'll find a block that looks like: Adheasion ( 0.19 0.38 1.8 0 )
DerailRailHeight ( 5cm )
DerailRailForce ( 2.5*112.3t )
DerailBufferForce ( 600kN )
NumWheels ( 8 )Most of the rolling stock has the DerailBufferForce set at about ( 200kn ). If you raise that value, the train can couple at faster speeds. (NOTE: the cars at both sides of the joint have to be adjusted)
For my personal use, I arbitrarily set the value at about 100kN per 16 tons, staying on the even hundred, and never less than 200kN nor more than 800kN. That way, I don't have to sneak into a joint at 2-3mph, but I still have to be careful about my speed into lightweight rolling stock.
This is just my way of doing things - if someone has found something better, they're welcone to suggest. I'll try anything out at least once.

JOhn
Oldrailfan
Railfan means anything on rails! Trains Trolleys Rollercoasters - you name it.

Alert | IP


[ Home | MSTS Forum | MSTS FAQ | File Library ] Copyright © 2002 by Nels Anderson. All Rights Reserved.

Restored from the Train-Sim.Com archive, captured June 26, 2003. About this archive.